MERCEDES ADAPTER Oil changes on most Mercedes are a snap with our special adapter. Attach directly to the dipstick tube, open valve on evacuator and watch the oil being sucked out. Clean and neat! No more hassles with removing skid plates or messing with stripped drain plugs. Because no probe is needed and the inside diameter is larger than most probes evacuation time is cut to a minimum. Suck out five quarts in under four minutes with oil at normal operating temperature. SPLITTER PROBE FOR FORD DIFFERENTIALS Our special splitter probe specially designed for those hard to access Ford differentials is a real timesaver. Just connect the splitter probe to your High Flow Differential Probe and slide both hoses in the fill hole. Cuts oil removal time almost in half compared to using a single thin probe.   MASTER CYLINDERS & BRAKE BLEEDING Do brake service? We can help! When changing out master cylinders suck out the oil prior to removal. Helps prevent spills on floors and painted surfaces. Some brake fluid will strip a cars paint before you have time to wipe it off. With our bleeder adapter one man brake bleeding is EZ! Attach the bleeder adapter to the wheel cylinder nut open valve on evacuator, crack open bleeder nut and suck out the air. Refill master cylinder and move on to the next wheel. SAVE TIME & NO MESS! Works on the majority of vehicles. See instructions that come with evacuator.